TOR Mini

Hover to Zoom

Combat-worthy lights and lasers, Mil-grade aluminum, built Steiner strong. Designed to expose, blind and target with maximum impact. Up to any challenge. Just like you.

The TOR Mini features a Type III hard-anodized machined-aluminum housing and rail mount. It is dustproof and splash-proof to IP54 standards and is available in red (635 nm) or green (520 nm) laser. Both the green and red lasers are direct diode type allowing them to operate in extreme cold weather. Other features include left and right fire buttons for ambidextrous use, constant power drive that ensures the laser output remains constant throughout the life of the battery, low battery indication, as well as windage and elevation bore sight adjustment screws.

The universal rail mount on the TOR Mini will fit all pistols that have a Picatinny or Weaver style rail forward of the trigger guard. This design allows optimum positioning of the laser so that the fire buttons are easily accessible for a wide range of users.

  • Item #7003: Green Laser
  • Item #7006: Red Laser (discontinued)
MSRP: 
$389.99

Buy Now From Steiner Dealer Locator

Product Comparisons

Add TOR Mini to Your Comparison List

Product Features: 

The TOR Mini features adjustable laser power with multiple settings (low, medium, high and high pulse) which are easily set by the user. The TOR Mini will also remember the chosen setting until it is reset, even if the battery is removed or replaced. The TOR Mini also has an internal accelerometer that senses the position of the pistol and when the optional Auto-On feature is activated the laser will turn on when the pistol is drawn from a holster and brought up level. This feature will also work when the pistol is picked up from lying on its side.

  • Rugged miliary-grade anodized aluminum housing
  • Adjustable windage/elevation
  • Universal rail mount
  • Water resistant
  • Fits common holsters
  • Ambidextrous operation 
  • Adjustable laser power levels
  • Auto-on function
  • Fits all pistols with a Picatinny or Weaver rail
  • Left/Right pressure pads

SPECIFICATIONS:

Item No.Case ColorLaser ColorVisible LaserIR PointerIR IlluminatorRestricted
7003BlackGreen<5 mW, Class 3RN/AN/AN/A
Wavelength - Visible Green Laser520 +/- 10 nm
Beam Divergence - Visible Red or Green Laser.5 in. at 50 ft
BatteryCR 1/3N
MaterialAluminum
ColorBlack
Weight (with battery)2.12 oz (60 g.)
Dimensions2.1 x 1.3 x 1.2 in (5.3 x 3.3 x 3.0 cm)
WaterproofYes
WarrantyTwo Year Warranty
Special FeaturesAuto On
7006BlackRed<5 mW, Class 3RN/AN/AN/A
Wavelength - Visible Red Laser635 +15/-5 nm
Beam Divergence - Visible Red or Green Laser.5 in. at 50 ft
BatteryCR 1/3N
MaterialAluminum
ColorBlack
Weight (with battery)2.12 oz. (60 g)
Dimensions2.1 x 1.3 x 1.12 in (5.3 x 3.3 x 3.0 cm)
WaterproofYes
WarrantyTwo Year Warranty
Special FeaturesRed Laser

  Download PDF of Specifications

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 157.93ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

I have a Springfield XD Mod 2 . Will a Tor mini #7003 fit ?

Asked by: Jim24
The TOR Mini should fit but the other ones will be too large.
Answered by: Steiner Tech Support
Date published: 2022-02-08

Hello, trying to find a laser device that will fit on a Hk45c pistol. The rail length is rather short. Just wondering if this might fit. I know the TOR micro does fit. Thanks!

Asked by: ROCKN
I haven't been able to test fit this specific combo yet but by going off dimensions I think it will fit pretty well actually.
Answered by: Steiner Tech Support
Date published: 2021-09-05

Does this fit a Baretta PX4 Sub

Asked by: Roobeg
The laser will be a little too long to fit properly.
Answered by: Steiner Tech Support
Date published: 2022-02-03

My switches are very hard to operate &amp; my screws for tightening sight broke off &amp; I need replacements

Asked by: Santa
No Problem! https://steiner.supportsync.com/
Answered by: Steiner Tech Support
Date published: 2021-09-05

Will this fit a Ruger Mark IV Tactical?&nbsp;

Asked by: MD467
Yes it will fit that handgun.
Answered by: Steiner Tech Support
Date published: 2022-03-01

Hope your well. What&rsquo;s the run time/battery life on a tor mini with the green laser. Secondly, how far does the beam extend? Thank you very much&nbsp;

Asked by: The Lorenzo
Here are the specs: Laser center wavelength: 520 nm Max laser power: 5.0 mW Laser spot divergence: 1.0 +/- 0.2 mrad Run time (laser @ 2 mW): 3 hrs Run time (laser @ 5 mW): 1.2 hrs Length x width x height (inches): 2.19 x 1.26 x 1.17 Length x width x height (mm): 55.6 x 32.0 x 29.8 Weight: 1.6 ounces (45 grams) Battery: one 1/3N Class 3R laser The beam will go for several hundred meters.
Answered by: Steiner Tech Support
Date published: 2021-09-05

I picked up a tor mini #7003 for my Springfield xds mod 2 45 acp and the sight doesn't sit flush with the trigger guard (extends about 1/4 in past the front end of the gun) is it just too short of a rail I'm guessing? Just curious.

Asked by: Grubbsy84
Yes it is due to the very short rail on those. It should not cause any problems to use however.
Answered by: Steiner Tech Support
Date published: 2022-03-18

My Steiner tor mini (green output) has only 3 settings, low , med , high, but no high pulse. Bought 2-2-22. is this a malfunction or did Steiner eliminate that function on new models? And how can I tell if this unit is a fake?

Asked by: Fakeprivatei
Shoot us a message here at the link below and we'll see what's going on. https://steiner.supportsync.com/
Answered by: Steiner Tech Support
Date published: 2022-02-15
  • y_2022, m_5, d_15, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_2826, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_steineroptics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 94.33ms
  • QUESTIONS, PRODUCT